
IGNITION SYSTEMS
Light your fire feature with the simplicity of a match or choose a fully automatic ignition system.
MERCURY IGNITION
The Mercury Ignition provides a layer of safety in the event a burner's flame is unexpectedly extinguished. This innovative new design provides a quick, automatic shutoff of gas flow and an easy reset to reignite the flame when ready to address building and safety code requirements, as well as personal safety preferences.


MATCH LIT IGNITION
All CROSSFIRE® Brass Burners come standard as a manual Match Lit System. Light a match and turn the key valve to ignite your fire feature's burner.
PBIK3.0
Push Button Ignition Kit:
-
Spark Igniter Rod and Wire
-
Push Button Battery Operated Control Module
PBIK3.0MBR
Push Button Ignition Kit and Mounting Bracket:
-
Spark Igniter Rod and Wire
-
Push Button Battery Operated Control Module
-
Mounting Bracket
PBIK3.0MBRKV12
Push Button Ignition Kit, Mounting Bracket, and 1/2" Key Valve Kit:
-
Spark Igniter Rod and Wire
-
Push Button Battery Operated Control Module
-
Mounting Bracket
-
1/2" Key Valve Kit
-
(2) Pre-mounted 1/2" Street Elbows
PBIK3.0MBRKV34
Push Button Ignition Kit, Mounting Bracket, and 3/4" Key Valve Kit:
-
Spark Igniter Rod and Wire
-
Push Button Battery Operated Control Module
-
Mounting Bracket
-
3/4" Key Valve Kit
-
(2) Pre-mounted 3/4" Street Elbows
PBIK3.0MBRFK1
Push Button Ignition Kit, Mounting Bracket, and 3/4" Flex Line Kit
-
Spark Igniter Rod and Wire
-
Push Button Battery Operated Control Module
-
Mounting Bracket
-
3/4" Flex Line Kit
-
(2) Pre-mounted 3/4" Street Elbows
PBIK3.0MBRFK2
Push Button Ignition Kit, Mounting Bracket, and 3/4" Dual Flex Line Kit
-
Spark Igniter Rod and Wire
-
Push Button Battery Operated Control Module
-
Mounting Bracket
-
3/4" Dual Flex Line Kit
-
(2) Pre-mounted 3/4" Street Elbows

PUSH BUTTON IGNITION

Turn the key to the 'on' position and push the button to ignite your burner.
3VIK-NG | 3VIK-LP
3 Volt Electronic Ignition System:
-
Spark Igniter
-
Control Module
-
D-Cell Battery Pack
-
3 Volt Gas Valve
-
Ignition Switch

3 VOLT IGNITION

A battery-operated ignition system with on and off switch. 3 Volt Ignition supplies up to 120K BTUs. Remote control available.

MERCURY IGNITION
-
Delivers unmatched BTU output of 240 BTUs compared to only 140 BTUs from any competitor
-
Provides superior gas line protection from water and debris when coupled with the WATERSTOP fitting
-
No electricity required - battery operated
-
3 year Residential and 1 year Commerical Warranty
24VIKHC-NG | 24VIKHC-LP
24 Volt Spark Ignition System:
-
Spark Igniter
-
Control Module
-
24 Volt Transformer

24 VOLT SPARK IGNITION

24 Volt Spark Ignition supplies up to 400K BTUs. Includes step down transformer for use with 24 Volt/110 Volt Supply. Remote control options available.
P24VIKSCCG-NG | P24VIKSCCG-LP
24 Volt Hot Surface Ignition System, Standard Capacity:
-
Hot Surface Igniter
-
50VA/24VAC Transformer
-
Maximum Gas Output 290K BTU/hr
P24VIKHCCG-NG | P24VIKHCCG-LP
24 Volt Hot Surface Ignition System, High Capacity:
-
Hot Surface Igniter
-
50VA/24VAC Transformer
-
Maximum Gas Output 780K BTU/hr

24 VOLT HOT SURFACE IGNITION

24 Volt Hot Surface Ignition Standard Capacity supplies up to 290K BTUs.
24 Volt Hot Surface Ignition High Capacity supplies up to 780K BTUs.
Includes step down transformer for use with 24 Volt/110 Volt Supply.
ELECTRONIC ACCESSORIES

3 VOLT REMOTE
3VRC
ON/OFF Remote Control for 3 Volt Ignition System

24 VOLT KEY CHAIN REMOTE
KCRC
ON/OFF Wireless Key Chain Remote Control & Plug In Receiver for 24 Volt Ignition System

DIAL TIMERS
Available in 2 hour and 12 hour options for automatic shut off with NEMA Rated outdoor enclosure.
DT2HRNB 2 Hour Dial Timer with NEMA Rated Enclosure
DT12HRNB 12 Hour Dial Timer with NEMA Rated Enclosure

EMERGENCY STOP
EMERSTOP
Push Button Emergency Stop with yellow shell and weatherproof lift cover.
Recommended for commercial properties.