top of page
product page banners_parts.png

PARTS

Need a replacement part? Questions about installation? Contact our Flame Consultants ►

FK1

For use with any burner 249K BTUs and below.
Kit Includes:

  • (1) 36” L x 3/4” Diameter Flex Line

  • (2) 3/4" Flared Fittings

  • 3/4” Key Valve

  • 3” and 12” Key

  • 1/2” x 2” Nipple 

FLKV34FIT180.png

FK2

For use with any burner 250K BTUs and above.
Kit Includes:

  • (2) 36” L x 3/4” Diameter Flex Lines

  • (4) 3/4" Flared Fittings

  • 3/4” Key Valve + 3” and 12” Key

  • (2) 3/4” x 3” Nipple

  • (2) 3/4” Tee

  • (1) 3/4” x 1/2” MM Reducer Fitting

FK2.png

FKM1

Mercury Ignition Single Flex Line Kit - for use with any burner 249k BTUs and below.

Kit Includes:

  • (1) 36" L x 3/4: Diameter Flex Line

  • (1) 1/2" x 2" Nipple

FKM1.png

FIT180

Flex Line & Key Valve Connection Fitting for use with any burner under 249K BTU’s. Connects 1/2” Plate Coupling to inside threaded 3/4” Flex Line Flare Connector

Kit includes:

  • (1) 1/2” x 2” Nipple

FIT250

Flex Line & Key Valve Connection Fittings for 250K - 299K BTU Burner. Connects 1/2” Plate Coupling to two 3/4” Flex Lines + connection of two 3/4” Flex Lines to 3/4” Key Valve.

Kit includes:

  • (1) 3/4” x 1/2” MM Reducer Fitting

  • (1) 3/4” x 3” Nipple

  • (2) 3/4” Tee 

FIT300

Flex Line & Key Valve Connection Fittings for 300k+ BTU Burner. Connects 3/4” Plate

Coupling to two 3/4” Flex Lines and two 3/4” Flex Lines to 3/4” Key Valve.
Kit includes:

  • (1) 3/4” x 3” Nipple

  • (1) 3/4” x 3” Nipple

  • (2) 3/4” Tee

FL3612

36" L x 1/2" Diameter Flex Line (MM)

FL3634

36" L x 3/4" Diameter Flex Line (MM)

KV12

1/2" Key Valve + 3" Key

KV34

3/4" Key Valve + 3" Key

KEY

Available in 3", 12" and 24"

ACCESS PANEL

16" x 16" exterior frame and 14" x 14" door opening for easy access to interior of fire feature

DRIPLEG12

1/2" Drip Leg Kit

DRIPLEG34

3/4" Drip Leg Kit

LPRH Regulator Hose.png

LPRH

Liquid Propane Regulator mounted on 5/16" 10’ Hose with handwheel quick connect. For use up to 200K BTUs with a 20LB Propane Tank.

REGLP200

Regulator 3/8 in. NPT Female Outlet 200K BTU/hr capacity. Maximum inlet pressure 250 psi. Low pressure outlet 11 in. W.C. Liquid Propane

FPVK_V2.png

FPVK

Fire Pit Vent Kit: (2) 12" x 4" Vents
+ 18 square inches of vent area per vent

flexible-installation-collar-1.jpg

COLLAR

Paver Kit Adjustable Install Collar 19”

COLLAR.png

COLLARF

19" Flexible, No Drill Collar for installation between courses of block

KVE4.png

KVE4

4" Threaded metal Key Valve Extension

KVE8.png

KVE8

8" Threaded metal Key Valve Extension

Need a replacement part or fitting? Have a question?

Contact our Flame Specialists at 303 346 2224

bottom of page