Manufacturer of the Crossfire Burners & Custom Fire Pits
Our ICC Design Certified (Crossfire) Combustion Burner System is the newest state
of the art outdoor patio flame system. Our Burner System’s regulator was developed
with a precise air to gas mixture ratio which produces a taller, brighter flame while
using only half the fuel of conventional fire rings. This cutting edge technology has
allowed our product to out perform all others on the market.
All Brass Crossfire Burners
Take a look at the traditional fire ring below. This is what fire rings look like after only a couple of years. Warming Trends Crossfire Burners are made of 100% brass which is non-corrosive. This means when you go with our burning system, you will receive not only a burner that will withstand the weather elements and not rust out, but also a LIFETIME WARRANTY on all our brass Crossfire Burners.
Traditional Fire Ring After a Few Years - Note the corrosion, breaks and holes.
This fire pit burning system is designed as a water and fire feature. It automatically ignites and burns ON TOP OF THE WATER!
All Weather Electronic Ignition System AWEIS SC Standard Capacity 290K BTU Max. ½” inlet/outlet
All Weather Electronic Ignition System AWEIS HC High Capacity 512K BTU Max. ¾” inlet/outlet
Automated Fire on Water Surface System AFOW/SUBEIS Capacity 400K BTU Max. @ 2 PSI min.
Submersible Manifolds AFOW
AFOW-HM7 Hexagon 7”
AFOW-RM12 Rectangular 12”
AFOW-RM18 Rectangular 18”
AFOW-SM12 Square 12”
AFOW–SM18 Square 18”
AFOW-4LLinear 2 rows 4’
Electronic Control Module Options
Automated Fire on Water Surface System
Flame/Heat Sense: Thermopile
Ignition Type: Hot Surface Ignition (Glow Plug)
Ignition Sequence: Intermittent Point
Ignition Source: Pilot
Max. Output BTU: 400K BTU/hr
Inlet/Outlet Size: 1/2" FPT
Operating Voltage: 24 volts ac
Inlet Gas Pressure Limit: 2.0 psi
Valve Enclosure Dim,: 4 3/8" x 5 1/2" x 4 3/8" (tall)
3 Volt Safety Ignition System Includes:
***Please note that 3 Volt ignition kit can only be used on systems up to 108K BTU***
All Weather Electronic Ignition System Standard Capacity 290K BTU Max. ½” inlet/outlet
24 Volt Safety Ignition System Includes:
Automated Fire on Water Surface System Capacity 500K BTU Max.
3 Volt Remote Control
36" 3/4" Flex Line with 1/2" Key Valve & 12" Key
Dual Flex Line & Key Kit
For 250K BTU and up, 2 36" long, 3/4" flex lines and one 12" key valve.
36" 1/2" Flex Line with 1/2" Key Valve & 12" Key
36" long 3/4" diameter Flex Line Only
58FL36 or 58FL24
1/2" Flex Line Only
12 Inch Rectanglular Manifold
18 Inch Rectanglular Manifold
7 Inch Hexagon Manifold
Electronic Ignition System
12 Inch Square Manifold
18 Inch Square Manifold
4 Foot Linear Manifold
Standard Construction & Landscaping - Raleigh, North Carolina
Installation of electric ignition system custom tiki torches in a beautiful backyard landscape that was also designed and installed by Warming Trends. These tiki torches are burning natural gas at 12K BTU each. Liquid propane is also an optional fuel source.